Dr. Sanford Siegal's COOKIE DIET™
Pool and Spa Filters
Filter     Order     Display # 
Filbur FC-0687, Predator 150, Clean & Clear 150

$119.99
[ learn more ]

Add to Cart
The Filbur FC-0687 Pool and Spa Filter replaces Unicel part number C-9415, Pleatco part number PAP 150, and Harmsco part number H-9415. Also known as part numbers FC0687, Predator 150, Clean Clear 150, C9415, R173216, and 59054300.The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Filbur Pool and Spa Filters are completely washable and reusable. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC0687 product specifications:Length: 31 1/8" Diameter: 10 1/16" Top: 6" Bottom: 6" 150 square feetThe Filbur FC-0687 works with hot-tubs and filters made by American Products and Pentair Pool Products. Original Manufacturer part numbers R173216 and 59054300.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1230, Hayward CX-250RE Pool Filter

$30.00
[ learn more ]

Add to Cart
The Filbur FC-1230, Hayward CX-250RE Pool Spa Filter replaces Unicel part number C-7626, Harmsco part number H-7626, and Pleatco part number PA 25. Also known as part numbers FC1230, Star Clear C250, CX250-RE, and Hayward CX 250. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1230 Product Specifications: Length: 9 13/16" Diameter: 7" Top: Open 3" Bottom: Open 3" Square Feet: 25The Filbur FC-1230 is compatible with hot tubs, pools and filters made by Hayward, Hollibaugh Spas, Pdc Spas, Phoenician Spas, Sonoma Spas and others. Original Manufacturer part number CX-250RE, CX250-RE. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1235, Hayward CX 470 Pool & Spa Filter

$47.00
[ learn more ]

Add to Cart
The Filbur FC-1235, Hayward CX 470 Pool Spa Filter replaces Unicel part number C-7447, Harmsco part number H-7447, and Pleatco part number PA 50-SV. Also known as part numbers FC1235, Super Star Clear C2000, Sta-Rite PRC-50, PRC 50,CX470-XRE, 25200-0150S, and SwimClear C2020.The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1235 Product Specifications: Length: 14 3/16" Diameter: 7" Top: Open 3" Bottom: Open 3" Square Feet: 50The Filbur FC-1235 is compatible with hot tubs, pools and filters made by Hayward, Sta-Rite, SwimQuip and others. Original Manufacturer part number CX470-XRE. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1240, Hayward CX 500

$38.58
[ learn more ]

Add to Cart
The Filbur FC-1240, Hayward CX 500 Pool Spa Filter replaces Unicel part number C-7656, Harmsco part number H-7656, and Pleatco part number PA 50. Also known as part numbers FC1240, Star Clear C500, and CX500-RE. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1240 Product Specifications: Length: 19 5/8" Diameter: 7" Top: Open 3" Bottom: Open 3" Square Feet: 50The Filbur FC-1240 is compatible with hot tubs, pools and filters made by Hayward, Cal Spas, Hollibaugh Spas, PDC Spas and others. Original Manufacturer part number CX500-RE.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1260, Hayward CX 570 Pool & Spa Filter

$58.99
[ learn more ]

Add to Cart
The Filbur FC-1260, Hayward CX 570 Pool Spa Filter replaces Unicel part number C-7477, Harmsco part number H-7477, and Pleatco part number PA 75SV. Also known as part numbers FC1260, CX570-XRE, 25200-0175S, H7477, PA75SV, CX570, C7477 and Sta-Rite PRC 75. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC1260 Product Specifications: Length: 19 5/8"Diameter: 7"Top: Open 3"Bottom: Open 3"Square Feet: 75The Filbur FC-1260 is compatible with hot tub filters made by Hayward, Sta-Rite and others. Original Manufacturer part number FC-1260.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturerÆs directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1270, Hayward CX-870 Pool & Spa Filter

$60.00
[ learn more ]

Add to Cart
The Filbur FC-1270, Hayward CX-870 Pool Spa Filter replaces Unicel part number C-7487, Harmsco part number H-7487, and Pleatco part number PA 100N. Also known as part numbers FC1270, Super Star Clear C4000, CX870-XRE, and CX-870RE. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1230 Product Specifications: Length: 25 1/2"Diameter: 7"Top: Open 3"Bottom: Open 3"Square Feet: 100The Filbur FC-1270 is compatible with hot tubs, pools and filters made by Hayward and others. Original Manufacturer part number CX870, CX870-RE. Four Filbur FC-1270 Cartridges can also replace the SwimClear C4020. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1280, Hayward C-800RE Pool & Spa Filter

$70.00
[ learn more ]

Add to Cart
The Filbur FC-1280, Hayward C-800RE Pool Spa Filter replaces Unicel part number C-8600, Harmsco part number H-8600, and Pleatco part number PA 80. Also known as part numbers FC1280, Star Clear II C1100, C8600, H8600, Star Clear II C1500, and CX800-RE. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1280 Product Specifications: Length: 17 3/8"Diameter: 8 1/2"Top: Open w/ Gasket 4"Bottom: Open w/ Gasket 4"Square Feet: 75The Filbur FC-1280 is compatible with hot tubs, pools and filters made by Hayward, Cal Spas and others. Original Manufacturer part number CX800-RE. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1294, Hayward CX-1750 Pool Filter

$115.00
[ learn more ]

Add to Cart
The Filbur FC-1294, Hayward CX-1750 Pool Spa Filter replaces Unicel part number C-8417, Harmsco part number H-8417, and Pleatco part number PA 175. Also known as part numbers FC1294, CX1750, C8417, H8417, Star Clear Plus C1750 and CX1750-RE. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-1294 Product Specifications: Length: 28 3/16" Diameter: 8 15/16" Top: Open 4" Bottom: Open 4" Square Feet: 175The Filbur FC-1294 is compatible with hot tubs, pools and filters made by Hayward, Sta-Rite and others. Original Manufacturer part number CX1750-RE. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-1950, PAC Fab MY 100 Pool Filter

$58.00
[ learn more ]

Add to Cart
The Filbur FC-1950, PAC Fab MY 100 Pool Spa Filter replaces Unicel part number C-7699, Harmsco part number H-9410, and Pleatco part number PFAB 100. Also known as part numbers FC1950, 17-2812, 4985, 32050204, PFAB100, MY-100, C7699, and Pac Fab MY100. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC1950 Product Specifications: Length: 22 1/8" Diameter: 7 7/8" Top: Open 3 1/16" Bottom: Open 3 1/16" Square Feet: 100The Filbur FC1950 is compatible with hot tub filters made by Pac Fab, Pentair Pool Products, Wet Institute and others. Original Manufacturer part number 17-2812. Cleaning your Filbur Pool and Spa FiltersIts time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturerÆs directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2018, Premier Maxi Sweep Pool Spa Filter

$42.80
[ learn more ]

Add to Cart
The Filbur FC-2018, Premier Maxi Sweep Pool Spa Filter replaces Unicel part number C-5371 and Pleatco part number PPR 75. Also known as part numbers C5371, FC2018, 27-056 and 27056. ***Please note The Premier Maxi Sweep requires 3 or 4 of the FC-2018 replacement cartridges***The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2018 Product Specifications: Length: 23 1/4" Diameter: 5 3/16" Top: Open 1 5/8" Bottom: Open 1 5/8" Square Feet: 75The Filbur FC-2018 is compatible with hot tubs, pools and filters made by Premier and others. Original Manufacturer part number 27-056. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2370, Rainbow Dynamic 25 Pool Filter

$28.99
[ learn more ]

Add to Cart
The Filbur FC-2370 Pool and Spa Filter replaces Unicel part number C-4625 and Pleatco part number PRB 25IN. Also known as Rainbow Dynamic 25 by Pentair Pool Products. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Filbur Pool and Spa Filters are completely washable and reusable. The Filbur FC2370 product specifications:Length: 13 5/16" Diameter: 4 15/16" Top: 2 1/8" Bottom: 2 1/8" 25 square feetThe Filbur FC-2370 works with hot-tubs and filters made by Aires, Alps Spas, Aries Spas, Blue Pacific, Continental Leisure, Conway Spas, Down East, Elite Spas, Esther Williams, FPI, HaughS, Heldor Spas, Hydro Pool Industries, J.E.M. Spas, Niagara Whirlpool, Orion Spas, Pdc Spas, Pentair Pool Products, Rainbow Plastics, Resort Spas, Sequoia Spas, Serenity Spas, Sun Spas, Thermo Spas, Warm Spring Spas, Waters Edge Spas. Also known as part number 17-2325.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturerÆs directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2385, Rainbow Dynamic 35 Pool Filter

$25.00
[ learn more ]

Add to Cart
The Filbur FC-2385, Rainbow Dynamic 35 Pool Spa Filter replaces Unicel part number C-4335, Harmsco part number H-4335, and Pleatco part number PRB 35IN3. Also known as part numbers C4335, H4335, 03FIL1300, 17-2482, 25393, 303557, 817-3501, Waterway 35 In-line, and FC2385. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2385 Product Specifications: Length: 9 1/4"Diameter: 4 15/16"Top: Open 2 1/8"Bottom: Open 2 1/8"Square Feet: 35The Filbur FC-2390 is compatible with hot tubs, pools and filters made by Aber Hot Tub, After Hour Spas, Belize Spas, Bullfrog Spas, Custom Molded Products, DM Industries, Down East, Great Lakes Spas, Gulf Coast Spas, Hydro Pool Industries, Hydro Spa, Leisure Bay, Maax Spas (Canada), Moose Mountain Spas, Pentair Pool Products, Rainbow Plastics, Rec Warehouse, Regency Spas, Serenity Spas, Vita Spas, Waterway Plastics, Wind River Spas, and others. Original Manufacturer part number 17-2482. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2387, Rainbow DSF 50 Pool & Spa Filter

$39.95
[ learn more ]

Add to Cart
The Filbur FC-2387, Rainbow DSF 50 Pool Spa Filter replaces Unicel part number C-4405 and Pleatco part number PRB 25SF. Also known as part numbers C4405, 17-2464, 817-5010, and 172464. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2387 Product Specifications: Length: 6 5/8" Diameter: 4 5/16" Top: Open 2 1/8" Bottom: Open 2 1/8" Square Feet: 50The Filbur FC-2387 is compatible with hot tubs, pools and filters made by Ahtria, Aqua Leisure, Arizona Pacific, Beachcomber, Beachcraft Spas, Caribbean Spas, Catalina/Caribbean Spas, Clearwater Spas, DFA, Diamante Spas, Discovery Spas, Freedom Spas, Grecian Spas, Hytec Spas, Legend Spas, Lifestyle Spas, Maax Spas (Canada), Moose Mountain Spas, Pentair Pool Products, Rainbow Plastics, Signature Spas, Sundance Spas, Sunrise Spas, Thermo Spas, Us Tooling Spas, Waterway Plastics, and others. Original Manufacturer part number 17-2464. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2390, Rainbow Dynamic 50

$30.00
[ learn more ]

Add to Cart
The Filbur FC-2390, Rainbow Dynamic 50 Pool Spa Filter replaces Unicel part number C-4950, Harmsco part number H-4950, and Pleatco part number PRB 50IN. Also known as part numbers FC2390, C4950, 03FIL1600, 100533, 6540-471, 17-2380, 25391, and 817-5000. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2390 Product Specifications: Length: 13 5/16" Diameter: 4 15/16" Top: Open 2 1/8" Bottom:Open2 1/8" Square Feet: 50The Filbur FC-2390 is compatible with hot tubs, pools and filters made by Aber Hot Tub, Accent Spas, Acryx-Maax Spas, Affordable Spas, After Hour Spas, Alps Spas, American Spas, Apollo Spas, Aqua Mystic, Aqua Tech Spas, Aquaform-Infinity Spa, Aquatic Industries, Arctic Spas, Arizona Pacific, Artesian Spas, Baja Spas, Beachcomber, Beachcraft Spas, Belize Spas, Blue Falls Mfg. Ltd., Blue Pacific, Bullfrog Spas, Cal Spas, Charisma Spas,Coast Spas, Coleman Spas, Coral Spas, Custom Molded Products, Dakota Spas, DFA, Diamante Spas, Diamond Spas, Discovery Spas, DM Industries, Dynasty Spas, Elite Spas, FPI, Freedom Spas, Gpm Industries, Great Lakes Spas, Grecian Spas, Haughs, Hawkeye Spas, Heldor Spas, Honey Tubs, Hydorwave Spas, Hydro Spa, J.E.M. Spas, Leisure Bay, Leisure Bay Spas, Maax Spas (Canada), Marathon Spas, Millennium Spas, Moonwater Spas, Morgan Spas, Niagara Whirlpool, Northwest Spas, Orion Spas, Pageant Spas, Paradise Spas, Pentair Pool Products, Phoenician Spas, Phoenix Spas, QCA Spas, Rainbow Plastics, Rec Warehouse, River Valley Spas, Rubadub Tub, Safari Spas, Seahorse Spas, Sequoia Spas, Signature Spas, Sonoma Spas, Spa Crest, Spas West, Streamline Spas, Sunbelt Spas, Suncountry Spas, Sundance Spas, Sunrise Spas, Sunset Spas, Superior Spas, Sweetwater Spas, Tiara Spas, Tiger River Spas, United Spas, US Spas, US Tooling Spas, Vita Spas, Warm Spring Spas, Waterway Plastics, Wind River Spas, and others. Original Manufacturer part number CX800-RE. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2715, Sundance 60 Twist Cap Pool Filter

$41.95
[ learn more ]

Add to Cart
The Filbur FC-2715, Sundance 60 Twist Cap Pool Filter replaces Unicel part number 6CH-961. Also known as part numbers FC2715 and 6CH961. Features removable cap.The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2715 Product Specifications: Length: 15 1/2" Diameter: 6 5/8" Top: Removable Cap w/ Arch Handle Bottom: 2" SAE Thread Square Feet: 60The Filbur FC-2715 is compatible with hot tubs, pools and filters made by Sundance and others. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2960, Waterway Pool 75 Pool & Spa Filter

$68.99
[ learn more ]

Add to Cart
The Filbur FC-2960 Waterway Pool 75 Pool Spa Filter replaces Unicel Part Number C-9401, Pleatco Part Number PWW 75, and Harmsco Part Number H-9401. Also known as Clearwater Pool 75, C9401, FC2960, Leisure Bay WW-500, 817-0075, and 111831. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2960 Product Specifications:Length: 13.25" Diameter: 10" Top: Open 5 15/16" Bottom: Open 6 1/16" Square Feet: 75The Filbur FC-2960 is compatible with pool, spa, and hot tub filters made by Leisure Bay, Rec Warehouse, Waterway Plastics and others. Original Manufacturer part number 817-0075.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2965, Waterway Pool 100 Pool Filter

$79.99
[ learn more ]

Add to Cart
The Filbur FC-2965, Waterway Pool 100 Pool Spa Filter replaces Unicel part number C-9402 , Pleatco part number PWW 100, and Harmsco part number H-9402. Also known as part numbers FC2965, C9402, Leisure Bay WW-100, PWW100, 817-0100, and 111832. Replaces Waterway Pool 100. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC2965 Product Specifications: Length: 19 1/4" Diameter: 10 Top: Open 5 15/16" Bottom: Open 6 1/16" Square Feet: 100The Filbur FC-2965 is compatible with hot tub filters made by Leisure Bay, Rec Warehouse, ClearwaterPool,Waterway Plastics and others. Original Manufacturer part number FC-2965, 8170100.Cleaning your Filbur Pool and Spa FiltersIt istime to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturerÆs directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-2969, Waterway Pool150 Pool & Spa Filter

$94.00
[ learn more ]

Add to Cart
The Filbur FC-2969, Waterway Pool150 Pool Spa Filter replaces Unicel part number C-9403, Harmsco part number H-9403, and Pleatco part number PWW 150. Also known as part numbers FC2969, Waterway Pool 150, Clearwater Pool, 817-0150, C9403, H9403, and 111833. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-2969 Product Specifications: Length: 25 1/4" Diameter: 10" Top: Open 5 15/16" Bottom: Open 6 1/16" Square Feet: 150The Filbur FC-2969 is compatible with hot tubs, pools and filters made by Leisure Bay, Rec Warehouse, Waterway Plastics and others. Original Manufacturer part number 817-0150 and 111833. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-3052 Pool and Spa Filter

$37.95
[ learn more ]

Add to Cart
The Filbur FC-3052 Pool and Spa Filter is also known as part number L200, L700, and PVT50W H. The FC3052 fits pools and spas made by Vita Spas and others. The Filbur Pool and Spa filters are made of ReemayÖ spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Filbur Pool and Spa Filters are completely washable and reusable. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-3052 product specifications:Length: 7"Diameter: 8 1/2"Top: Semi-Circular HandleBottom: 1 1/2" Male Pipe Thread 50 square feet**Please Note : Remove "PAD adaptor" from skimmer before threading the filter into the suction fitting.**Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-3550, Leisure Bay 130 Pool & Spa Filter

$84.95
[ learn more ]

Add to Cart
The Filbur FC-3550, Leisure Bay 130 Pool Spa Filter replaces Unicel part number C-7413 and Pleatco part number PLB 130. Also known as part numbers FC3550, C7413, PLB130, and 111776. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-3550 Product Specifications: Length: 28 15/16" Diameter: 7 1/2" Top: Open 2 15/16" Bottom: Open 2 15/16" Square Feet: 130The Filbur FC-3550 is compatible with hot tubs, pools and filters made by Leisure Bay, Rec Warehouse and others. Original Manufacturer part number 111776. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-3710, Coleco F-120 Pool & Spa Filter

$6.99
[ learn more ]

Add to Cart
The Filbur FC-3710, Coleco F-120 Pool Spa Filter replaces Unicel part number C-4607, Harmsco part number H-4607, and Pleatco part number PC 7-120. Also known as part numbers C4607, FC3710, H4607, 58600, 59900, F18, and Coleco F120 w/core.The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-3710 Product Specifications: Length: 8" Diameter: 4 1/4" Top: Open 1 15/16" Bottom: Open 1 15/16" Square Feet: 5The Filbur FC-3710 is compatible with hot tubs, pools and filters made by Coleco, Intex Pools, and others. Original Manufacturer part number 58600. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-3915, Watkins 30 Pool & Spa Filter

$20.00
[ learn more ]

Add to Cart
The Filbur FC-3915, Watkins 30 Pool Spa Filter replaces Unicel part number C-6430, Harmsco part number H-6430, and Pleatco part number PWK 30. Also known as part numbers C6430, H6430, and 31489. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-3915 Product Specifications: Length: 10 1/2" Diameter: 6" Top: Open 1 15/16" Bottom: Open 1 15/16" Square Feet: 30The Filbur FC-3915 is compatible with hot tubs, pools and filters made by Hot Spot Spas, Hot Springs Spas, Watkins Mfg. Original Manufacturer part number 31489. Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
Filbur FC-4005, Doughboy 20 Pool and Spa Filter

$28.95
[ learn more ]

Add to Cart
The Filbur FC-4005, Doughboy 20 Pool and Spa Filter replaces Unicel part number C-7401 and Pleatco part number PD 20SL. Also known as part numbers C7401, PD20SL, FC4005, and 2396-020.The Filbur Pool and Spa filters are made of ReemayÖ spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Filbur Pool and Spa Filters are completely washable and reusable. All Filbur Pool Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool Spa filters.The Filbur FC-4005 product specifications:Length: 6 1/2" Diameter: 7" Top: Handle Bottom: Open 1 1/2" 20 square feetThe Filbur FC-4005 works with hot-tubs and filters made by Doughboy. Original Manufacturer part number 2396-020.Cleaning your Filbur Pool and Spa FiltersIt is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturerÆs directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
Read more..
 
<< Start < Prev 1 Next > End >>
Results 1 - 23 of 23
[ Back ]